You must become a member of the Australian Typ 901 Register in order to be post at this website.
Once you become a member an invitation to register at this website will be emailed to you.
Membership information can be found by clicking here.
...and f**k me...Roland your exhaust bypass controlled by bluetooth is the coolest thing ever. Not sure how to fit/weld it into stainless SSI heat exchangers. But my god!, the sound was brilliant...almost hubba inducing.
Hubba definition. Noun: erection hard enough to be embarrassing, but not hard enough to do anything useful with.
For those of you that want to take the Pepsi challenge:
Buy a spare cat bypass so you can return to stock when you’ve had enough. Chop your existing one in half.
Tack on the valve to ensure you get the fit just right. There is approximately 10 degrees of adjustment on the outlet. If welding is not your thing use some gaffer tape to get the angle right and take the assembly to an exhaust repairer.
Ensure there is room for the solenoid to sit vertically.
Once satisfied weld the circumference of the valve to the bypass.
Run the power cable under the carpet to the fuse box.
finit.
As always all of my mods are easily removed. It would take about 20 mins to return to stock.
For those of you that want to take the Pepsi challenge:
Buy a spare cat bypass so you can return to stock when you’ve had enough. Chop your existing one in half.
Tack on the valve to ensure you get the fit just right. There is approximately 10 degrees of adjustment on the outlet. If welding is not your thing use some gaffer tape to get the angle right and take the assembly to an exhaust repairer.
Ensure there is room for the solenoid to sit vertically.
Once satisfied weld the circumference of the valve to the bypass.
Run the power cable under the carpet to the fuse box.
finit.
As always all of my mods are easily removed. It would take about 20 mins to return to stock.
Really
How long to change the engine back???
Clyde Boyer
TYP 901 Register Inc.
President
Early S Register Member #294
...and f**k me...Roland your exhaust bypass controlled by bluetooth is the coolest thing ever. Not sure how to fit/weld it into stainless SSI heat exchangers. But my god!, the sound was brilliant...almost hubba inducing.
Hubba definition. Noun: erection hard enough to be embarrassing, but not hard enough to do anything useful with.
Funny, I googled "hubba" and got this: hubba is a North American informal exclamation used to express approval, excitement, or enthusiasm, especially with regard to a person's appearance.[1]
sigpicPhil Lack
TYP901 Register Inc. # 002 (Founding President)
Early 911-S Registry # 690
R-Gruppe # 367
'72 911E 2.4 Coupe (SOLD)
'24 MB GLA35 AMG- daily
2012 BMW 1M Coupe 6-spd (SOLD)
1974 FIAT 124 Sport coupe
Comment